量具量仪中英文对照

    量具量仪中英文对照

 1.刀口型直尺：knife straigjht edge

　　2.刀口尺： knife straigjht edge

　　3.三棱尺three edges straigjht edge

　　4.四棱尺four edges straigjht edge

　　5.条式和框式水平仪 bar form and square levels

　　6.合像水平仪 imaging level meter

　　7铸铁平板 cast iron surface plate

　　8.岩石平板 granite surface plate

　　9.铸铁平尺cast iron straigjht edge

　　10.钢平尺和岩石平尺 steel and granite straigjht edge

　　11.圆度仪 roundness measuring instrument

　　12.电子水平仪electronic level meter

　　13.表面粗糙度比较样块铸造表面 roughness comparison specimens cast surface

　　14.表面粗糙度比较样块磨、车、铣、插及刨加工表面 roughness comparison specimens-

ground,turned,bored,milled,shape and planed

　　15.表面粗糙度比较样块电火花加工表面 roughness comparison specimens spark-erostion 

machining surfaces

　　16.表面粗糙度比较样块抛光加工表面 roughness comparison specimens pollshed surfaces

　　17.接触式仪器的标称特性

　　18.轮廓profiles

　　19.轨迹轮廓 traced profile

　　20.基准轮廓 reference profile

　　21.总轮廓 total profile

　　22.原始轮廓 primary profile

　　23.残余轮廓residual profile

　　24.触针式仪器stylus instrument

　　25.感应位移数字存储触针式量仪displacement sensitive,digitally storing stylus 

instrument

　　26.触针式仪器的部件stylus instrument components

　　27.丈量环measurement loop

　　28.导向基准renfence guide

　　29.驱动器 drive unit

　　30.测头(传感器) probe(pick-up)

　　31.拾取单元 tracing element

　　32.针尖 stylus tip

　　33.转换器 transducer

　　34.放大器 amplifier

　　35.模/数转换器analog-to-digital converter

　　36.数据输进data input

　　37.数据输出data output

　　38.轮廓滤波和评定profile filtering and evaluation

　　39.轮廓记录器profile recorder

　　40.仪器的计量特性metrological characteristics of the instrument

　　41.静测力的变化change of static measuring force

　　42.静态测力 static measuring force

　　43.动态丈量力 dynamic measuring force

　　44.滞后 hysteresis

　　45.测头的丈量范围 transmission function for the sine waves

　　46.仪器的丈量范围measuring range of the instrument

　　47.模数转换器的量化步距quantization step of the ADC

　　48.仪器分辨力 instrument resolution

　　49.量程分辨力比range-to-resolution ratio

　　50.测头线性偏差probe linearity deviation

　　51.短波传输界限short-wave transmission limitation

　　52.轮廓垂直成分传输 vertical profile component transmission1

　　53表面粗糙度比较样块抛丸、喷砂加工表面 roughness comparison specimens shot blasted 

and blasted surfaces

　　54产品结构几何量计术规范（GPS）geometrical product specifications(GPS)

　　55表面结构 surface texture

　　56接触式仪器的标称特性 nominal characteristics of contact instruments

　　57公法线千分尺micrometer for mearsuring root tangent lenghths of gear teeth

　　58   大答应误差 maximum permissible error

　　59圆柱直齿渐开线花键量规 gauges for straight cylindrical involute splines

　　60齿厚游标卡尺 Gear tooth vernier calipers

　　61齿轮渐开线样板the involute master of gear

　　62齿轮螺旋线样板 the helix master of gear

　　63矩形花键量规 gauges for straight –sided splines

　　64丈量蜗杆 master worm

　　65   测齿仪 universal gear measuring instrument

　　66   渐开线检查仪universal involute measuring instrument

　　67齿轮齿距丈量仪gear circular pictchmeasuring instrument

　　68   齿轮丈量机 Universal gear measuring machine

　　69齿轮螺旋线丈量仪gear helix measuring instrument

　　70便携式齿轮齿距丈量仪 manual gear circular pitch measuring instrument

　　71便携式齿轮基节丈量仪manual gear base pitch measuring instrument

　　72立式滚刀丈量仪vertical hob measuring instrument

　　73齿轮双面啮合综合丈量仪Gear dual-flank measuring instrument

　　74齿轮单面啮合整体误差丈量仪Gear single-flank meshing integrated error measuring 

instrument

　　75梯形螺纹量规 gauges for metric trapezoidal screw threads

　　76工作螺纹量规work gauges for metric trapezoidal screw threads

　　77校对螺纹量规check gauges for metric trapezoidal screw threads

　　78.梯形螺纹量规型式与尺寸 Types and dimensions of metric trapezoidal screw threads

　　79.普通螺纹量规型式与尺寸 Types and dimensions of gauges purpose screw threads

　　80.非螺纹密封的管螺纹量规 Gauges for pipe threads prcessure-tight joints are not made 

on the threads

　　81.螺纹千分尺Screw thread micrometer

　　82.   大答应误差 maximum permissible error

　　83.间隙螺纹量规 Clearance screw gauge

　　84.量针 Bar gauge

　　85.螺纹样板 Screw thread template

　　86.用螺纹密封的管螺纹量规 Gauges for pipe threads where pressure-tight joints are 

made on the threads

　　87.刀具预调丈量仪 精度 Accuracy of the presetting instrument

　　88.薄膜式气动量仪 Membrane type pneumatic measuring instrument

　　89.光栅线位移丈量系统 Grating linear displacement measuring system

　　90.光栅角位移丈量系统 Grating angular displacement measuring system

　　91.磁栅线位移丈量系统 Magnet-grid linear displacement measuring system

　　92.量块附件 Accessories for gauge blocks

　　93.V形架 Vee blocks

　　94.比较仪座 Comparator stand

　　95.磁性表座 Magnetic stand

　　96.   表座 Universal stand for dial indicator